LM358DT Low-Power Dual Op Amp | SOIC-8 General-Purpose Amplifier | STMicroelectronics | Jaron

All Categories

ST

Home >  Products >  IC >  ST

LM358DT

Low-power analog IC integrating two independent high-gain op amps, operating from a single 3 V–30 V supply or dual ±1.5 V–±15 V supplies, with input common-mode range including ground, 1.1 MHz unity-gain bandwidth and about 0.6 V/µs slew rate, ideal for sensor signal conditioning, power monitoring, and general-purpose analog front ends.

Product Overview

     The LM358DT from STMicroelectronics is a low-power dual operational amplifier featuring two independent, internally frequency-compensated high-gain op-amps designed for operation over a wide range of supply voltages, especially optimized for single-supply systems.

     With an input common-mode range including the negative rail and an output swing from 0 V up to approximately (VCC – 1.5 V), it can amplify and buffer low-side signals in 5 V logic systems without requiring a negative supply.

     Packaged in an SOIC-8 (SO8) outline, the device typically draws about 0.5–0.7 mA per channel, keeping total supply current in the ~1–1.2 mA range, making it attractive for low-power and cost-sensitive analog designs.

 

Key Features

  • Dual low-power operational amplifiers
  • Large DC voltage gain: typically ~100 dB
  • Unity-gain bandwidth: about 1.1 MHz
  • Slew rate: typically about 0.6 V/µs
  • Low input bias current: typically around 20 nA
  • Low input offset voltage: typically around 2 mV
  • Input common-mode voltage range includes ground / negative rail
  • Output voltage swing: 0 V to (VCC – 1.5 V) typical
  • Package: SOIC-8 (SO8, LM358DT supplied in tape & reel)

 

Product Applications

  • Sensor signal conditioning (temperature, pressure, light, current, etc.)
  • Power rail voltage/current monitoring and under/over-voltage detection
  • Active filters, buffering, an
  • d general signal amplification
  • Analog front ends and threshold comparators in industrial controllers
  • General-purpose op-amp stages in appliances, consumer, and security systems
  • Educational boards, generic op-amp modules, and prototyping circuits

 

Technical Specifications

Parameter Specification
Number of Amplifiers 2
Supply Voltage Single 3–30 V or ±1.5–±15 V
Supply Current ≈ 0.5–0.7 mA/channel, ≈ 1–1.2 mA total
Voltage Gain Approximately 100 dB
Unity-Gain Bandwidth ≈ 1.1 MHz
Slew Rate Typical 0.6 V/µs
Input Bias Current Typical 20 nA level
Input Offset Voltage Typical ≈ 2 mV
Input CM Range Includes ground/negative power supply
Output Swing 0 V ~ (VCC – 1.5 V)
Package SOIC-8 (LM358DT)

 

RFQ & Support

Jaron supplies genuine ST LM358DT with global stock and full technical support.
Please include quantity, target price, ETA, and application details in your RFQ.
We provide BOM kitting, EOL replacement evaluation, PPV cost optimization, and worldwide semiconductor sourcing solutions.

 

📩 Email: [email protected]

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/Whatsapp
Name
Company Name
Message
0/1000

RELATED PRODUCT